SHURE SM81LC
Statique Cardioïde

 

photo_617

0Hz to 20 kHz frequency response
Flat response curve for accurate reproduction of sound sources
Low noise and high output clipping level
Low distortion over a wide range of load impedances
Cardioid polar pattern, uniform with frequency and symmetric about axis, providing maximum rejection and minimum coloration of off-axis sounds
Low RF susceptibility
Selectable low-frequency response: flat, 6 or 18 dB/octave rolloff
0 dB/10 dB lockable attenuator switch
Phantom powering (DIN 45 596 voltages of 12 to 48 Vdc)
Rugged steel construction for durability
Field-usable over wide range of temperature and humidity conditions

En savoir +

SHURE SM91
Statique Cardioïde

photo_634

The Beta 91 combines superior « attack » and « punch » for studio quality sound, even at the extremely high sound pressure levels encountered inside a kick drum. Its boundary effect design produces a strong, solid low-end response that has been specifically tailored for heavy bass applications.

Frequency response shaped specifically for kick drums and other instruments
Wide dynamic range for use in high SPL environments
Low-profile design requires no external mounting hardware
Detachable cable for easy storage
Legendary Shure quality, ruggedness, and reliability

En savoir +

 

SHURE Béta52

photo_618

Dynamic SuperCardioïde
Frequency response shaped specifically for kick drums and bass instruments
Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
Studio quality performance, even at extremely high sound pressure levels
Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
Hardened steel mesh grille that resists wear and abuse
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Neodymium magnet for high signal–to–noise ratio output
Low sensitivity to varying load impedance
Legendary Shure quality and reliability
En savoir +

 

SHURE SM57 LC
Dynamic Cardioïde

photo_619

Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
Professional-quality reproduction for drum, percussion, and instrument amplifier miking
Uniform cardioid pickup pattern isolates the main sound source while reducing background noise Pneumatic shock-mount system cuts down handling noise
Extremely durable under the heaviest use
Frequency response: 40 to 15,000 Hz
En savoir +

 

SHURE SM58
Dynamic Cardioïde

photo_620

Frequency response tailored for vocals, with brightened midrange and bass rolloff
Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
Pneumatic shock-mount system cuts down handling noise
Effective, built-in spherical wind and pop filter
Supplied with break-resistant stand adapter which rotates 180 degrees
Legendary Shure quality, ruggedness and reliability
Cardioid (unidirectional) dynamic
Frequency response: 50 to 15,000 Hz

En savoir +

 

KLARKTEKNIK DN100

Direct Input

photo_623

Input
Type active electronic, balanced or unbalanced
Impedance 1M Ω nominal, balanced or unbalanced (jack connectors) 20K Ω (XLR input only)
Connectors 2 quarter inch jacks and 3-pin XLR linked in parallel
Maxmum level 30dBu
Attenuator 30dB switchable

Output
Type Transformer Isolated, balanced
Impedance 300 Ω
Connector 3 pin XLR
Max. Level 10dBu with load >2k Ω
Min. load 600 Ω

Performance
Noise -100dBu, 20Hz to 20kHz unweighted, with input terminated by 10k resistor
Frequency response +0.5/-1dB 20Hz to 20kHz
Distortion (THD+N) output <0.01% @ 1kHz, +4dBu

Power Requirement
Voltage +48V Phantom *
Current consumption <10mA

En savoir +

 

SENNHEISER E604
Dynamic Cardioïde

photo_621

Principe du transducteur dynamique
Directivité cardioïde
Réponse en fréquence 40…..18000 Hz
Sensibilité en champ libre 1,8 mV/Pa
Impédance nominale 350 Ohm
Impédance de charge minimale 1000 Ohm
Connecteur XLR-3
Dimensions Ø 33 x 59 mm
Poids sans cable 60 g

En savoir +

 

SENNHEISER MD421
Dynamic Cardioïde

photo_622

Principe du transducteur dynamique
Directivité cardioïde
Réponse en fréquence 30…..17000 Hz
Sensibilité en champ libre 2 mV/Pa +- 3 dB
Impédance nominale 200 Ohm
Impédance de charge minimale 200 Ohm
Connecteur XLR-3
Dimensions 215 x 46 x 49 mm

En savoir +

SENNHEISER E906
Dynamic SuperCardioïde

photo_632

Principe du transducteur                        dynamique
Directivité                                               supercardioïde
Réponse en fréquence                            40…18000 Hz
Sensibilité en champ libre                       2,2 mV/Pa
Impédance nominale                               350 Ohm
Impédance de charge minimale              1000 Ohm

En savoir +