NEUMANN KM184

 Statique Cardioïde

 Le modèle KM 184 (de directivité cardioïde), en particulier, est devenu un classique dans le domaine des microphones miniatures de haute qualité.

→ 

SHURE SM81LC

  Statique Cardioïde

  •      0 Hz to 20 kHz frequency response
  •      Flat response curve for accurate reproduction of sound sources
  •      Low noise and high output clipping level
  •      Low distortion over a wide range of load impedances
  •      Cardioid polar pattern, uniform with frequency and symmetric about axis, providing maximum rejection and minimum coloration of off-axis sounds
  •      Low RF susceptibility
  •      Selectable low-frequency response: flat, 6 or 18 dB/octave rolloff
  •      0 dB/10 dB lockable attenuator switch
  •      Phantom powering (DIN 45 596 voltages of 12 to 48 Vdc)
  •      Rugged steel construction for durability
  •      Field-usable over wide range of temperature and humidity conditions

SHURE SM91

  Statique Cardioïde

The Beta 91 combines superior "attack" and "punch" for studio quality sound, even at the extremely high sound pressure levels encountered inside a kick drum. Its boundary effect design produces a strong, solid low-end response that has been specifically tailored for heavy bass applications.

  • Frequency response shaped specifically for kick drums and other instruments
  • Wide dynamic range for use in high SPL environments
  • Low-profile design requires no external mounting hardware
  • Detachable cable for easy storage
  • Legendary Shure quality, ruggedness, and reliability
     

→ 

SHURE Béta52

  Dynamic SuperCardioïde
  • Frequency response shaped specifically for kick drums and bass instruments
  • Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability

SHURE SM57 LC

  Dynamic Cardioïde
  •      Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
  •      Professional-quality reproduction for drum, percussion, and instrument amplifier miking
  •      Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
  •      Pneumatic shock-mount system cuts down handling noise
  •      Extremely durable under the heaviest use
  •      Frequency response: 40 to 15,000 Hz

SHURE SM58

 Dynamic Cardioïde
  •       Frequency response tailored for vocals, with brightened midrange and bass rolloff
  •       Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
  •       Pneumatic shock-mount system cuts down handling noise
  •       Effective, built-in spherical wind and pop filter
  •       Supplied with break-resistant stand adapter which rotates 180 degrees
  •       Legendary Shure quality, ruggedness and reliability
  •       Cardioid (unidirectional) dynamic
  •       Frequency response: 50 to 15,000 Hz

KLARKTEKNIK DN100

 Direct Input

Input
Type active electronic, balanced or unbalanced
Impedance 1M Ω nominal, balanced or unbalanced (jack connectors) 20K Ω (XLR input only)
Connectors 2 quarter inch jacks and 3-pin XLR linked in parallel
Maxmum level 30dBu
Attenuator 30dB switchable

Output
Type Transformer Isolated, balanced
Impedance 300 Ω
Connector 3 pin XLR
Max. Level 10dBu with load >2k Ω
Min. load 600 Ω

Performance
Noise -100dBu, 20Hz to 20kHz unweighted, with input terminated by 10k resistor
Frequency response +0.5/-1dB 20Hz to 20kHz
Distortion (THD+N) output <0.01% @ 1kHz, +4dBu

Power Requirement
Voltage +48V Phantom *
Current consumption <10mA

→ 

SENNHEISER E604

  Dynamic Cardioïde

Principe du transducteur dynamique
Directivité cardioïde
Réponse en fréquence 40.....18000 Hz
Sensibilité en champ libre 1,8 mV/Pa
Impédance nominale 350 Ohm
Impédance de charge minimale 1000 Ohm
Connecteur XLR-3
Dimensions Ø 33 x 59 mm
Poids sans cable 60 g

SENNHEISER MD421

  Dynamic Cardioïde

Principe du transducteur dynamique
Directivité cardioïde
Réponse en fréquence 30.....17000 Hz
Sensibilité en champ libre 2 mV/Pa +- 3 dB
Impédance nominale 200 Ohm
Impédance de charge minimale 200 Ohm
Connecteur XLR-3
Dimensions 215 x 46 x 49 mm

SENNHEISER E906

  Dynamic SuperCardioïde


Principe du transducteur                        dynamique  
Directivité                                               supercardioïde  
Réponse en fréquence                            40...18000 Hz  
Sensibilité en champ libre                       2,2 mV/Pa  
Impédance nominale                               350 Ohm  
Impédance de charge minimale              1000 Ohm  

→